PV cleaning equipment manufacturer
Solar panel cleaning equipment for every PV application

20 m/min travel speed
Remote-controlled crawler
6-8H runtime
01 In-house R&D
02 Full-scenario range
03 Global voltage options
04 Project assessment
05 Parts & support
Which PV cleaning solution fits your site?
Small rooftop PV
Commercial rooftops
Utility-scale farms
Automated row cleaning
Not sure which system fits your panel layout?
FEATURED SOLUTION

WET / DRY
R1 Flexible cleaning without blind spots
- Working angle
- ≤ 20°
- Remote range
- 150-200 m
- Travel speed
- 20 m/min
- Runtime
- 6-8 hours
- Cleaning width
- 1100 / 1500 mm
- Water use
- Max. 1.84 L/min
From portable tools to automated PV cleaningChoose a category to explore equipment built for different project scales and operating conditions
Built for different PV environments

Desert solar farms

Commercial rooftops

Ground-mounted arrays

Engineering the complete PV cleaning workflow
R&D
Range
Global
Support
Get a project recommendation in four steps
- 1
Share site details
Plant capacity, layout, tilt, gaps, soiling and water conditions.
- 2
Application review
We check equipment compatibility and operating constraints.
- 3
Compare options
Review cleaning method, capacity, accessories and configuration.
- 4
Confirm delivery
Finalize testing, equipment version, training and spare parts.
Compare PV cleaning equipment
| Product | Best for | Project scale | Mode | Key advantage |
|---|---|---|---|---|
| G1 | Small rooftops | 100-500 m² | Wet | Lightweight, unpowered brush |
| G2 | Localized stubborn soiling | 100-500 m² | Wet | Compact single-head cleaning |
| G3 | C&I rooftops | 500-6000 m² | Wet | Balanced double-head design |
| G4 | Fast distributed-PV cleaning | 500-6000 m² | Wet / dry | 60 cm roller brush |
| R1 | Flexible large arrays | Commercial / utility | Wet / dry | Battery crawler mobility |
| R2 | Continuous crawler cleaning | Commercial / utility | Wet / dry | Unlimited mains runtime |
| R20 | Fixed utility-scale rows | Utility-scale | Configurable | Scheduled autonomous cleaning |
Plan cleaning with better technical information
Answers before you shortlist a system
The correct model depends on plant size, array layout, panel tilt, module gaps, soiling type, water availability and the daily cleaning target. Share those parameters for a project-specific recommendation.
Yes. R1, R2 and G4 support dry-cleaning configurations. Suitability depends on dust characteristics and module condition.
R1 and R2 are specified for working angles up to 20°. Maximum-span guidance is 20 cm for R1 and 25 cm for R2. Final compatibility requires layout confirmation.
PV-specific PBT and nylon brush options are available. Brush selection, cleanliness, operating pressure and the presence of abrasive particles all matter, so the operating procedure must match site conditions.
Yes. WaterSprayElephant works with regional partners on product configuration, voltage and plug options, sales materials, technical training and spare-parts planning.
Please provide project country, plant capacity or area, module layout, tilt, row dimensions, horizontal and vertical gaps, soiling conditions, water and power availability, plus the desired cleaning frequency.






